,

Grazing Horse Bronze Side Table

Hollow-cast in bronze by the traditional lost-wax method, 400 × 400 × 594 mm. The horse bows its head to graze and its neck becomes the column carrying a small round top — a quiet sculptural side table for seating areas.

Product Overview

XLJJ-BJ005 uses one of the oldest gestures in equestrian art — a horse reaching down to graze — as the structure of a small side table. The head lowers, the neck arcs upward, and that single sweeping line carries the round top. It is a piece where the pose does the engineering, and because the whole figure is hollow-cast in bronze by the traditional lost-wax method, the line from muzzle to tabletop stays unbroken.

The finish is a warm brown-bronze patina applied and sealed by hand, with lighter wear on the raised planes of the neck and shoulders so the form reads clearly in daylight. At 594 mm the table stands at sofa-arm height. The round top of roughly 400 mm is enough for a drink, a small tray or a table lamp, and the compact base means the piece fits between two chairs or in a corner without blocking circulation.

Weight is carried through the legs and hooves into a stable stance, so the table does not tip when a cup is set down on one edge. It is intended for indoor use, and it sits well beside timber, stone and lacquered floors alike.

Product Features

  • Structure: one continuous cast-bronze form — grazing horse as column, top supported above the neck
  • Casting: hollow-cast in bronze by the traditional lost-wax method
  • Finish: hand-applied warm brown patina, sealed
  • Top: small round top with a soft brushed sheen
  • Weight: 7.1 kg — light enough to reposition by hand
  • Stance: four legs and hooves, weighted for stability in daily use

Key Specifications

Model No. XLJJ-BJ005
Dimensions 400 × 400 × 594 mm (L × W × H)
Weight 7.1 kg
Height 594 mm — sofa-arm height
Top Round top, brushed bronze sheen
Body Hollow-cast bronze, lost-wax method, hand-applied brown patina, sealed
Assembly Arrives assembled
Placement Indoor
Customization Size, pose scale and patina tone on request

Applications

  • Between two armchairs in a living room
  • Reading nook with a table lamp on top
  • Hotel lounge and club seating
  • Equine-themed interiors, stud farms and country estates
  • Gallery and showroom accents

Customization Options

Height and top diameter can be adjusted, and the pose can be rescaled up to console height for project work. The patina can be moved toward a paler gold or a darker, almost blackened brown. For horse-racing and equestrian interiors we can supply a series of matched pieces, including the same figure as a drinks table and as a display stand. OEM and ODM drawings are welcome.

Packaging & Delivery

Each table is wrapped, corner-protected and packed in a foam-lined wooden crate braced to the finished height. Crate size and freight options are confirmed with your quotation, and multiple pieces can be consolidated into a single shipment.

Frequently Asked Questions

1. Does the horse’s head touch the floor?

No. The head and muzzle hang clear above the ground; the weight is carried on the four legs and hooves, which keeps the pose stable and the muzzle free of wear.

2. Is the table cast in one piece?

The horse, its legs and the support beneath the top are cast as one bronze assembly by the lost-wax method, then hand-finished. There are no bolted joints in the visible form.

3. Is the bronze solid or hollow?

Hollow-cast in bronze by the traditional lost-wax method — a shell construction rather than a solid block, which keeps the piece light enough to reposition easily.

4. Can it be made taller?

Yes. The figure can be rescaled to a taller console or bar height, with the top enlarged to suit the new proportions.

5. Is it suitable for outdoor use?

The patina is sealed for interior use. For covered outdoor settings we can advise on an additional protective finish — tell us where the piece will stand.

6. What are the ordering terms?

Both sample orders and container orders are welcome. Send quantity, size requirements and destination port for a full quotation.

Request a Quote

Request a quote for XLJJ-BJ005 — send your required size and destination and we will confirm the patina options, lead time and shipping cost. Contact TYART Bronze, or see the rest of the range in our bronze table collection.

Related Bronze Pieces

编号

XLJJ-BJ005

size(mm)

400*400*594

weight(kg)

7.1

Reviews

There are no reviews yet.

Be the first to review “Grazing Horse Bronze Side Table”

Your email address will not be published. Required fields are marked *

Scroll to Top